Description
Free Shipping (Special Order)
This 12V 100Ah DIN lithium ion phosphate battery is a safer, more lightweight alternative in your application. nAt 30 lbs, this battery is less than half the weight of the lead-acid or AGM equivalent, helping to fight against the drag caused by heavier options. It maintains consistent power and is equipped with handles for carrying, an M8 terminal type and and a built-in battery management system (BMS) The RB100-D battery meets UL, UN, CE and IEC certifications. nAll RELiON LiFePO4 batteries have installation flexibility, fast-charging capabilities and are maintenance free. Where maintaining water is never done because there is no water in these batteries, and the life expectancy is 10 to 12 years. They can be run clear down tell they stop. and recharge, or can be recharged any time you finish using them, there is no memory to worry about like lead acid batteries.
PRODUCT SPECIFICATIONS Voltage: 12.8V Amp Hours: 100Ah DIMENSIONS & WEIGHT Length: 13.2 in (335 mm) Width: 6.9 in (174 mm) nHeight: 7.5 in (191 mm) Weight: 30.2 lbs (13.7 kg) APPLICATIONS AWP Electric Vehicles Floor Machines Marine Recreational Vehicles Solar
ELECTRICAL SPECIFICATIONS |
Nominal Voltage |
12.8 V |
Nominal Capacity |
100 Ah |
Capacity @ 25A |
240 min |
Energy |
1280 Wh |
Resistance |
≤30 mΩ @ 50% SOC |
Efficiency |
99% |
Self Discharge |
<3% per Month |
Maximum Modules in Series |
4 |
MECHANICAL SPECIFICATIONS |
Dimensions (L x W x H) |
13.2 x 6.9 x 7.5" 335 x 174 x 191 mm |
Weight |
30.2 lbs (13.7 kg) |
Terminal Type |
M8 x 1.25 |
Terminal Torque |
80 - 100 in-lbs (9 - 11 N-m) |
Case Material |
ABS |
Enclosure Protection |
IP66 |
Cell Type - Chemistry |
Cylindrical LiFePO4 |
DISCHARGE SPECIFICATIONS |
Maximum Continuous Discharge Current |
100 A |
Peak Discharge Current |
200 A (7.5 s ±2.5 s) |
BMS Discharge Current Cut-Off |
280 A ±50 A (9 ±4 ms) |
Recommended Low Voltage Disconnect |
11 V |
BMS Discharge Voltage Cut-Off |
8 V (2.0 ±0.08 vpc) (140 ±60 ms) |
Reconnect Voltage |
9.2 V (2.3 ±0.1 vpc) |
Short Circuit Protection |
200-600 µs |
CHARGE SPECIFICATIONS |
Recommended Charge Current |
5 A - 50 A |
Maximum Charge Current |
100 A |
Charge Current 32°F to 14°F (0 to -10°C) |
≤0.1 C |
Charge Current 14°F to -4°F (-10 to -20°C) |
≤0.05 C |
Recommended Charge Voltage |
14.2 V - 14.6 V |
BMS Charge Voltage Cut-Off |
15.6 V (3.9 ±0.025 vpc) |
|
(1.1 ±0.4 s) |
Reconnect Voltage |
15.2 V (3.8 ±0.05 vpc) |
Balancing Voltage |
14.4 V (3.6 ±0.025 vpc) |
TEMPERATURE SPECIFICATIONS |
Discharge Temperature |
-4 to 140 ºF (-20 to 60 ºC) |
Charge Temperature* |
-4 to 113 ºF (-20 to 45 ºC) |
Storage Temperature |
23 to 95 ºF (-5 to 35 ºC) |
BMS High Temperature Cut-Off |
176 ºF (80 ºC) |
Reconnect Temperature |
122 ºF (50 ºC) |
*Refer to charge currents below 32°F (0°C) |
|
COMPLIANCE SPECIFICATIONS |
Certifications |
CE (battery) |
|
UN38.3 (battery) |
|
UL1642 & IEC62133 (cells) |
Shipping Classifications |
UN 3480, CLASS 9 |
PERFORMANCE CHARACTERISTRICS
HAVE ADDITIONAL QUESTIONS?
Our team of dedicated LiFePO4 specialists can help!
Contact Us